Low delta T airflow allows precise thermal validation without distorting room temperature or triggering false HVAC behaviour.

Multi-zone control enables targeted commissioning of PDUs, ATS units, or multiple circuit feeds – essential for complex server rack configurations.

A functional check (airflow and power) is recommended every 6 months, with an annual visual inspection for mechanical damage or contamination.

Yes – all Fortress air-cooled load banks are MURC (Multi Unit Remote Controller) compatible and can be linked in groups of up to 200 units.

5m, 10m, and 15m cable/connector sets are available. Custom lengths can be supplied on request.

Minimal – we suggest downloading the datasheet and contacting us with your required quantity of X100F units.

Yes – standard units include DN100 stainless flanges. Fortress can customise to suit your connection spec.

Modern racks often use both liquid and fan-based cooling. Hybrid units let you validate both load profiles in one pass.

After each test, moisture must be fully purged from the unit to avoid internal residue. Fortress provides maintenance guidance and purge procedures.

Yes – Fortress liquid load banks support grouped communication for simultaneous control and monitoring.

5m, 10m, and 15m cable/connector sets are available. Custom options are supported.

Due to the custom nature of liquid load applications, there’s no fixed checklist. Contact us with your system specs and we’ll tailor a solution.

Yes – standard models include DN100 stainless flanges. Fortress can customise for other flange sizes or configurations.

They’re used to validate on-site chillers, CDU loops, and rack-level cooling solutions without introducing additional room heat. They also work alongside air-cooled load banks for complete HVAC system testing.

After each test, moisture must be fully purged from the unit to avoid internal residue. Fortress provides maintenance guidance and purge procedures.

Yes – all Fortress liquid load banks support grouped control and remote monitoring via our MURC system.

Fortress offers cable/connector sets in 5m, 10m, and 15m lengths. Custom cable sets available on request.

Due to the complexity of liquid-cooled applications, there’s no fixed checklist. Please contact us directly so we can design a tailored solution to suit your facility.

Yes – standard models include DN125 stainless flanges. Customisation is available.

They allow validation of liquid cooling loops, CDUs, and rack-level infrastructure. They are essential when testing modern high-density deployments that exceed air cooling capacity.

After each test, moisture must be fully purged from the unit to avoid internal residue. Fortress provides maintenance guidance and purge procedures.

Yes – all Fortress liquid load banks can be grouped and monitored using our MURC system.

Standard Fortress cable sets are available in 5m, 10m, and 15m lengths. Custom sets available on request.

Due to the bespoke nature of high-capacity liquid systems, there’s no fixed checklist. Please contact us so we can scope your needs and configure the right solution.

Yes – standard models include DN150 stainless flanges. Custom options are available.

They enable safe, accurate simulation of high-thermal loads without exhausting heat into the environment, and are critical for validating chillers, CDUs, and HVAC systems.

After each test, moisture must be fully purged from the unit to avoid internal residue. Fortress provides maintenance guidance and purge procedures.

Yes – all Fortress liquid load banks can be connected and controlled in groups.

5m, 10m, and 15m cable/connector sets are available. Custom lengths on request.

Due to their complexity, we recommend contacting us directly so we can discuss your infrastructure and application needs.